Technical Information
115
CVA 4062/CVA 4066/CVA 4068 Coffee Systems
7 CVA Replacement Coffee Grinders
Should the need arise to replace a grinder assembly in any whole-bean CVA system,
be advised that you (or the servicer) may find some coffee residue in the new grinder.
This is normal. These grinders are calibrated at the factory using real coffee beans.
There is no need to question the fact that this is a new part.
8 CVA 406X Hot Milk Temperatures
In some cases, customers prefer to have hotter milk temperatures when making
cappuccino or latte macchiato. The temperature of the hot milk & froth should be 54°C
+/- 4°C (122 – 136°F).
If the temperatures are not in this range, replace the coupling connector, part number
07735341 (#23 & #24 on the parts diagram).
In order to get the best temperature results when dispensing latte macchiato, decrease
the milk component by one-third, and increase the froth component by the same
amount. This can be done in programming mode under ‘Manually Setting Beverage
Sizes’.
To Next Page
Loading...
Need help?
General
