Miele CVA 4062 Technical Information

Technical Information
43
CVA 4062/CVA 4066/CVA 4068 Coffee Systems
13. Remove the white cam.
14. Remove the brew unit drive.
Figure 030-14: Brew Unit Drive Retaining Screws
Note:
When re-installing the brew unit drive, ensure that the white cam is in the home
position. See Brew Unit Drive, Home Position, Section 030-2.1.3.
4.2 Removing the Grind Amount Compensation Microswitch (S51/4)
1. Remove the appliance from its cabinet. See Section 010-4.1.
2. Carefully remove the top cover retaining screws. The larger (T20) screws have
metal washers underneath that can easily be misplaced.
3. Remove the top cover.
4. Remove the three service door retaining screws; see Figure 030-11, Item 1.
5. Release the wiring harness (black cable) connecting the control and power
electronics from its guide.
6. Open the service door. See Figure 030-12.
7. Disconnect the microswitch electrical connection; see Figure 030-12, Item 1, for
location.
8. Release the microswitch from its retaining tabs to remove.
4.3 Removing the Brew Unit Position Microswitches (S60/1, S60/2)
1. Remove the appliance from its cabinet. See Section 010-4.1.
2. Carefully remove the top cover retaining screws. The larger (T20) screws have
metal washers underneath that can easily be misplaced.
3. Remove the top cover.
4. Remove the three service door retaining screws; see Figure 030-11, Item 1.
5. Release the wiring harness (black cable) connecting the control and power
electronics from its guide.

Miele CVA 4062 Specifications

General

Brand	Miele
Model	CVA 4062
Category	Coffee Maker
Language	English