Technical Information
20
CVA 4062/CVA 4066/CVA 4068 Coffee Systems
4.2 Installation
Note:
Make sure that the cabinet or the walls are stable enough to
support the appliance.
The CVA is designed to be built into cabinets and must be fully
installed before any operation is preformed.
This appliance can be installed above another appliance but there
must be a solid, closed shelf between the base of the coffee
machine and the top of the appliance installed below.
Exercise caution while operating the appliance. Coffee, hot water
and steam can cause burns and damage to surrounding areas.
Allow an additional depth of 2 ½” for CVA 4066 installations (see
Figure 010-2).
Figure 010-2: CVA 4066 Plumbing
4.2.1 Installation Procedure
Note:
Make sure power is not supplied to the appliance while installation or
maintenance work is being preformed. Disconnect the power supply to the work
area by unplugging the appliance and tripping the circuit breaker. The coffee
system must be installed into cabinetry before being used.
1. For installation, provide the proper clearances and shelving support. Also allow an
additional depth of 2.5” for CVA 4066 models.
2. Connect to a plumbed cold-water supply (CVA 4066 systems). Before installing the
CVA system into the cabinet, check/test the water connections for leaks.
To Next Page
Loading...
Need help?
General
