Mindray BeneHeart D2 User Manual

Defibrillator/Monitor Operator’s Manual 3 - 5
3.3 Changing General Settings
3.3.1 Setting the Date and Time
Before putting the equipment into use for the first time, you should check and set the system date and time in
accordance with your local time.
To set the system time, you can choose any of the following ways:
■ Using the Navigation knob
1. Use the Navigation knob to move the cursor on the system time, and press the Navigation knob.
2. Set the system time.
3. Select [Confirm].
■ Through the Configuration Main menu
1. Press the Main Menu button on the front panel, and then select [Others >>] → [Configuration >>] →
enter the required password.
2. Select [General Setup], and set the system time.
3. Select [Return].
■ Through the Configuration View menu
1. Press the Main Menu button on the front panel, and then select [Others >>] → [Configuration >>] →
[View Config].
2. Select [General Setup], and set the system time. You cannot select date format and time format in this
case.
3. Select [Return].
■ T
hrough the CMS
If connected to the CMS, the CMS automatically synchronize the system time to the equipment, and you
cannot use the Navigation knob to change the system time on the equipment. For details on connecting
the CMS, refer to 20.3Connecting the CMS.
If the system time is changed through the Configuration Main menu or Configuration View menu, the
equipment will restart. If the system time is changed using the Navigation knob, or from the CMS, the
equipment will generate a event to remind you.
3.3.2 Adjusting the Screen Brightness
1. Press the Main Menu button on the front panel, and then select [Others >>].
2. Set [Brightness] to an appropriate level. 10 is the brightest, and 1 is the least bright.
You can also change the screen brightness by selecting [Others] from the Configuration Main menu.
3.3.3 Changing Key Volume
1. Press the Main Menu button on the front panel, and then select [Others >>].
2. Select [Key Volume] and then select an appropriate value. 0 means key volume off and 10 is the maximum
volume.
You can also change key volume by selecting [Others] from the Configuration Main menu.
3.3.4 Selecting High Contrast Display
The equipment has the function of high contrast display so that you can view the display under high ambient
illumination.
To enable or disable the high contrast display:
■ In the Monitor, Manual Defib or Pacer mode
Press the Main Menu button on the front panel, and then select [High Contrast] to enable the high
contrast display. To disable the high contrast display, select [Full Color] in the main menu.

Mindray BeneHeart D2 Specifications

General

Brand	Mindray
Model	BeneHeart D2
Category	Medical Equipment
Language	English