NIBP Monitoring
13-11
NOTE
z Set PAT TYPE to ADU in the PATIENT SETUP menu before leakage test.
z The pneumatic test, other than being specified in the EN 1060-1
standard, is to be used to simply determine whether there are air leaks in
the NIBP airway.
13.5 Maintenance and Cleaning
WARNING
z Do not press the rubber tube on the cuff with excessive strength.
z When a reusable cuff is not connected to the monitor or is being
cleaned, always cover the rubber tube with a lid. Avoid splashing liquid
into the rubber tube or the monitor inadvertently.
Reusable Blood Pressure Cuffs
The cuff is not suitable for dry-cleaned. Instead, it should be machine or hand
washed. Hand washing, may prolong the service life of the cuff. Before washing,
remove the latex rubber bladder. Allow the cuff to dry thoroughly after washing, and
then reinsert the rubber bladder. The cuff can be disinfected by means of
conventional autoclaving, gas, or radiation disinfection in hot air ovens, or sterilized
by immersion in decontamination solutions. Remember to remove the rubber
bladder if you use this method
To Next Page
Loading...
Need help?
General
