112
Chapter 5 Operation
VIDEO SYSTEM OTV-SI
Using the remote control switch that is assigned to
“FREEZ”
1. Assign the “FREEZ” function to one of the remote control switches on the
videoscope or camera head following the instructions given in Section 5.9,
“Remote control switches”.
2. Press the remote control switch for “FREEZ”. Every time it is pressed, the
freeze is turned ON and OFF.
Using the keyboard
Press the “F3” key on the keyboard. This key turns the freeze function ON and
OFF.
When the menu is not displayed, pressing the remote control
switch for “FREEZ” or the “F3” key on the keyboard displays
the following for 3 seconds at the bottom left of the video
monitor screen.
5.11 Zoom
An electrically magnified (zoom) image can be displayed on the monitor by using
the remote control switches or the keyboard (optional).
• When the videoscope is used, the image can be changed
between normal size (1X) and 1.2X magnified.
• When the camera-head is used, the image can be changed
between normal size (1X) and 1.5X magnified.
Using the menu
1. If the video monitor does not display the menu, press the remote control
switch for execution or for selection, the “F1”, “Enter”, “ ”, “ ”,“” or “”
key on the keyboard to display the menu.
2. Press the remote control switch for selection, the “” or “” key on the
keyboard and select “NEXT” (see Figure 5.6 on page 57).
FREEZE : Frozen image display
LIVE : Real-time image display
To Next Page
Loading...
Need help?
General
