Chapter 5 Operation
125
VIDEO SYSTEM OTV-SI
5.16 Recording with the video tape recorder
The image can be recorded using the remote control switches or the keyboard
(optional).
Do not connect or disconnect the VTR remote control cable
while the video tape recorder is in the record/pause mode.
This may result in a malfunction of the video tape recorder.
• When directly controlling the video tape recorder, refer to the
video tape recorder’s instruction manual.
• The video tape recorder’s playback function cannot be
controlled from this instrument.
Using the menu
1. Refer to the video tape recorder’s instruction manual, and set up the
record-pause function on the video tape recorder.
2. If the video monitor does not display the menu, press the remote control
switch for execution or for selection, the “F1”, “Enter”, “ ”, “ ”, “” or “”
key on the keyboard to display the menu.
3. Press the remote control switch for selection, the “” or “” key on the
keyboard and select “VTR” (see Figure 5.80).
To Next Page
Loading...
Need help?
General
