Olympus OTV-SI User Manual

Chapter 5 Operation
115
VIDEO SYSTEM OTV-SI
5.12 Saving user settings
Save the user settings
On this instrument, settings for up to 4 users can be saved by navigating through
the menu using the remote control switches or the keyboard (optional).
1. Set up the functions of this instrument to be saved. The functions that can
be saved are shown in Table 5.3 on page 122.
2. If the video monitor does not display the menu, press the remote control
switch for execution or for selection, the “F1”, “Enter”, “  ”, “  ”, “” or “”
key on the keyboard to display the menu.
3. Press the remote control switch for selection, the “” or “” key on the
keyboard and select “NEXT” (see Figure 5.6 on page 57).
4. Press the remote control switch for execution, the “Enter” or “  ” key on the
keyboard four times to display the menu bar shown in Figure 5.63 on
page 107.
5. Press the remote control switch for selection, the “” or “” key on the
keyboard and select “PRSET” (see Figure 5.71).
Figure 5.71
VISY218

Olympus OTV-SI Specifications

General

Brand	Olympus
Model	OTV-SI
Category	Medical Equipment
Language	English