64
Chapter 5 Operation
VIDEO SYSTEM OTV-SI
5.4 Adjusting the video monitor
The color bar can be displayed by navigating through the menu using the remote
control switches or the keyboard (optional).
The color bar can be displayed if a videoscope or camera
head is not connected to this instrument.
1. If the video monitor does not display the menu, press the remote control
switch for execution or for selection, the “F1”, “Enter”, “ ”, “ ”, “”or “”
key on the keyboard to display the menu.
2. Press the remote control switch for selection, the “” or “” key on the
keyboard and select “NEXT” (see Figure 5.16).
Figure 5.16
3. Press the remote control switch for execution, the “Enter” or “ ” key on the
keyboard two times to display the menu bar shown in Figure 5.17.
To Next Page
Loading...
Need help?
General
