Olympus OTV-SI User Manual

Chapter 5 Operation
119
VIDEO SYSTEM OTV-SI
5.13 Load user settings
User settings can be loaded by navigating through the menu using the remote
control switches or the keyboard (optional).
1. If the video monitor does not display the menu, press the remote control
switch for execution or for selection, the “F1”, “Enter”, “  ”, “  ”, “” or “”
key on the keyboard to display the menu.
2. Press the remote control switch for selection, the “” or “” key on the
keyboard and select “NEXT” (see Figure 5.6 on page 57).
3. Press the remote control switch for execution, the “Enter” or “  ” key on the
keyboard four times to display the menu bar shown in Figure 5.63 on
page 107.
4. Press the remote control switch for selection, the “” or “” key on the
keyboard and select “PRSET” (see Figure 5.71 on page 115).
5. Press the remote control switch for execution, the “Enter”, “  ” or “  ” key
on the keyboard to display the menu bar shown in Figure 5.72 on page 116.
6. Press the remote control switch for execution, the “Enter”, “  ” or “  ” key
on the keyboard to select the number to be loaded (for example, “NO.[ 3]”)
(see Figure 5.76).
Figure 5.76
VISY218

Olympus OTV-SI Specifications

General

Brand	Olympus
Model	OTV-SI
Category	Medical Equipment
Language	English