Omni 7000 Series User Manual

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
6-3
Front Panel Operations
6.1.2 Stations
To access current Station operations, follow these instructions:
1.
a. In the Home menu, use the arrow
navigation keys to go to and select
Stations.
b. Press the OK key.
2.
a. Use the Left or Right arrow
navigation keys to select the Station
you wish to access.
b. Press OK to go to the detail screen
for that Station.
3.
Use the Page Up or Page Down buttons
to scroll through the Detail screen for the
Station or view the entire list of variables
currently being measured.
4.
To return to the Stations menu and view
Station 2, either press the Back key until
you see the screen shown in Step 2 or use
the Right arrow key to highlight Station 2
at the top of the screen.
5.
When finished, press the Home key or
Back key to return to the Home menu, as
needed.
Alternatively, you can also press
the Stations function key along the
bottom of the screen to access the
same Stations screen as shown in
Step 2.
Press the Reports function key to
go to the Reports screen
(Section 6.4).
Station 2 is not a standard feature
and will only appear if licensed.

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English