Omni 7000 Series User Manual

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
6-14
Front Panel Operations
9.
a. Use the arrow keys to select the line
you wish to edit and then press OK to
access the field and make changes.
b. When finished, press OK or the
Accept function key to save your
changes.
10.
Press the Back key to return to the main
Products screen and select the next
product to edit, as needed.
6.6.4 Edit Transducers
To edit transducer settings, follow these instructions:
1.
a. In the Home menu, use the arrow
navigation keys to go to and select
Operate.
b. Press the OK key.
2.
a. In the Operate Functions menu,
select Edit Transducers.
b. Press OK.
While you can only edit the product
name from OMNICONNECT, you
can edit both the DCF Selection
(A, B or Product) and the Relative
Density value from this screen.

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English