Omni 7000 Series User Manual

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
6-9
Front Panel Operations
6.
The Measurement Audit and Status
reports require you to choose a specific
number of events, up to 1000, to print.
a. Press OK to access the number field
if you wish to edit the number of
events to be printed.
b. Press OK or the Accept function key
to save your changes.
c. Press Print to print the report.
6.5 User Displays
The User Display option in the Home menu gives Operators the ability to view the real-time
screens or live data produced by the flow computer (Figure 6-1). These numbered displays are
configured through OMNICONNECT (go to Section 3.8
User Displays).
Figure 6-1: User Display Example
6.6 Operate Features
The Operate menu gives you the ability to edit process functions and access the batch control
settings as well as PID control functions.
6.6.1 Edit Meter Factor
To edit the Meter Factor (MF), follow these instructions:
1.
a. In the Home menu, use the arrow
navigation keys to go to and select
Operate.
b. Press the OK key.

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English