OMNI 4000/7000 Operations and Maintenance Guide – Rev F
a. In the Home menu, use the arrow
navigation keys to go to and select
Utilities.
b. Press the OK key.
With System Date/Time highlighted, press
OK.
a. Use the arrow keys to select the
variable you wish to edit.
b. Press OK to access the field and
make changes.
c. Press OK or the Accept function key
to save your changes.
a. Continue to view or edit date and time
settings, as needed.
b. When finished, press the Back key to
return to the Utilities screen or the
Home key to return to the Home
screen.
7.3.2 Calibration
Input Calibration
The options to calibrate by variable name (for example, ‘Temperature’), will not be
selectable under the six individual Meter Runs or the two Stations or the prover until
input channels have been assigned to them in OMNICONNECT.
To calibrate the input channels, follow these instructions:
To Next Page
Loading...
Need help?
General
