Omni 7000 Series User Manual

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
6-12
Front Panel Operations
6.
Use the Right or Left arrow keys to select
a different Meter Run or Station (at the top
of the screen) to edit other DCFs or press
the Home or Back keys to return to the
Operate Functions menu.
6.6.3 Edit Products
To edit products, follow these instructions:
1.
a. In the Home menu, use the arrow
navigation keys to go to and select
Operate.
b. Press the OK key.
2.
a. In the Operate Functions menu,
select Edit Products.
b. Press OK.
3.
a. Use the arrow keys and page buttons
to navigate to the product you wish to
edit.
b. When the correct product is
highlighted, press OK.
4.
This is the Product # Operate screen.
a. If you need to edit the product’s Meter
Factor, go to Step 5.
b. If you need to edit the product’s DCF,
go to Step 6.

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English