Omni 7000 Series User Manual

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
1-3
The OMNI 4000/7000 Series
1.3.1 IEC Test Procedure Compliance
To meet the standards/directives in Section 1.3, the OMNI 4000/7000 models comply with the
IEC test procedures listed in this section.
IEC 60068-2-1
Environmental testing–Part 2-1: Tests–Test A: Cold
IEC 60068-2-2
Environmental testing–Part 2-2: Tests–Test B: Dry heat
IEC 60068-2-47
Environmental testing–Part 2-47: Test–Mounting of specimens for vibration,
impact and similar dynamic tests
IEC 60068-2-64
Environmental testing–Part 2-64: Tests–Test Fh: Vibration, broadband
random and guidance
IEC 60068-3-1
Environmental testing–Part 3: Background information–Section One: Cold
and dry heat tests
IEC 60068-3-4
Environmental testing–Part 3-4: Supporting documentation and guidance–
Damp heat tests
IEC 60654-2
Operating conditions for industrial-process measurement and control
equipment–Part 2: Power
IEC 61000-2-1
Electromagnetic Compatibility (EMC)–Part 2: Environment–Section 1:
Description of the environment–Electromagnetic environment for
low-frequency conducted disturbances and signaling in public power supply
systems
IEC 61000-4-1
Electromagnetic Compatibility (EMC)–Part 4-1: Testing and measurement
techniques–Overview of IEC 61000-4 series
IEC 61000-4-2
Electromagnetic Compatibility (EMC)–Part 4-2: Testing and measurement
techniques–Electrostatic discharge immunity test
IEC 61000-4-3
Electromagnetic Compatibility (EMC)–Part 4-3: Testing and measurement
techniques–Radiated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-4
Electromagnetic Compatibility (EMC)–Part 4-4: Testing and measurement
techniques–Electrical fast transient/burst immunity test
IEC 61000-4-5
Electromagnetic Compatibility (EMC)–Part 4-5: Testing and measurement
techniques–Surge immunity test
IEC 61000-4-6
Electromagnetic Compatibility (EMC)–Part 4-6: Testing and measurement
techniques–Immunity to conducted disturbances, induced by
radio-frequency fields
IEC 61000-4-8
Electromagnetic compatibility (EMC)–Part 4-8: Testing and measurement
techniques–Power frequency magnetic field immunity test
IEC 61000-4-17
Electromagnetic Compatibility (EMC)–Part 4-17: Testing and measurement
techniques–Ripple on D.C. input power port immunity test
IEC 61000-4-29
Electromagnetic Compatibility (EMC)–Part 4-29: Testing and measurement
techniques–Voltage dips, short interruptions and voltage variations on D.C.
input port immunity tests
IEC 61000-6-1
Electromagnetic compatibility (EMC)–Part 6-1: Generic standards–
Immunity for residential, commercial and light-industrial environments
IEC 61000-6-2
Electromagnetic compatibility (EMC)–Part 6-2: Generic standards–
Immunity for industrial environments
IEC 61000-6-4
Electromagnetic compatibility (EMC)-Part 6-4: Generic standards–Emission
standard for industrial environments

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English