Omni 7000 Series User Manual

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
3-35
OMNICONNECT® Operations
4.
a. Click on the Batch Scheduling tab to make any changes to those options. The
Disable Stack Shift on Auto Batch Ends option is only available for
liquid applications.
b. Click Apply to save your changes.
c. For more information on batch scheduling and ending operations, go to Section 3.6.4
d. Ending a Batch.
e. For information on Batch Reports, go to Section 4.5.5 Batch, Daily and Prove
Reports.
3.6.2 Adjust Batch Size
To adjust the batch size in liquid applications, follow these instructions:
1.
In the Actions ribbon, click Operate.
2.
a. Expand the Control tree, and expand
the Batch – Stack Shift list.
b. Select a Meter Run or Station batch
to edit.
3.
a. To adjust the size of the batch in
progress or a currently idle batch, go
to Step 4.
b. To adjust the size of a batch in the
sequence other than the batch in
progress or one that is currently idle,
go to Step 5.

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English