Omni 7000 Series User Manual

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
6-5
Front Panel Operations
6.3 Proving Functions
6.3.1 Manual Prove Request
To manually request a prove, follow these instructions:
1.
a. In the Home menu, use the arrow
navigation keys to go to and
select Prove.
b. Press the OK key.
2.
a. Use the Right or Left arrow keys to
select the Meter Run (at the top of the
screen) for which you need to run
a prove.
b. Press the Prove function key to start
the prove sequence.
3.
Press the Abort function key at any time to
stop the prove, if needed.
If a prove is active on a different Meter Run, you will see this temporary message.
4.
If you need to run a prove on a different
Meter Run, use the Right or Left arrow
keys to select a different Meter Run at the
top of the screen.
The Status field shows the status
of the prove as it progresses. Go to
Section 3.5.3 for more information
on prove status messages.

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English