4.43
Cleanfire Fuel Injection
4
9. Enter the REQUEST CODE generated by Digital
Wrench® into the information box.
10. After entering the REQUEST CODE, click
“C
ONTINUE”.
11. The next screen asks for the following information:
• Desired Reflash File
• Vehicle VIN
• Customer Name, Address, Zip Code
12. After entering the required information, click
“C
ONTINUE”.
13. If all of the information was accurate,
the website will
generate and AUTHORIZATION CODE.
14. Copy the code, and then enter the code into the
AUTHORIZATION box in Digital
Wrench®. Click
“CONTINUE”.
15. The reflash process will begin. Verify all
connections
are properly made. Do not touch anything during the
process.
16. Verify the reflash was a success by comparing the
software ID number
listed under the “CUSTOMER
AND VEHICLE IDENTIFICATION” button with the
number recorded in step 6.
NOTE: If security function was enabled on vehicle
prior
to replacing the ECU and/or performing the
engine controller reprogramming, the Security
Enable procedure will have to be completed to
activate security in the ECU.
To Next Page
Loading...
Need help?
General
