2.23
Maintenance
2
Fuel Tank Vent Hose Routing
Route the vent hose into the left-rear over structure tube.
Verify the hose is not kinked.
Air Box/Pre-Filters
Inspect the air intake system as outlined in the periodic
maintenance table. Replace cracked, broken, or missing
parts.
Verify the hood intake screens are not torn or missing. An
i
ntake tube connects the hood plenum to the air box inside
the engine compartment.
Always verify the intake tube is installed properly in both
the
air box and hood plenum when installing the hood
assembly.
INTAKE TUBE
HOOD
INTAKE PLENUM
FOAM FILTER
MESH SCREEN
FOAM GASKET
TRUMPET PLATE
AIRBOX TOP
AIRBOX BASE
GEAR CLAMPS
BOOTS
VENT BRACKET
TRUMPETS
2010 Rush
BARRIER MAT
BARRIER MAT
BARRIER MAT
BARRIER MAT
To Next Page
Loading...
Need help?
General
