EasyManuals Logo

Polaris 600 RUSH 2010 User Manual

Polaris 600 RUSH 2010
512 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #360 background image
8.40
Steering and Suspensions
2010 Progressive 120 Rail Assembly
Assembly Notes
• Never re-use lock nuts. Always replace with new
pa
rts.
• All pivots must rotate freely after tightening
fa
steners.
RAIL SLIDER
TRACK TENSIONER BRACKET
RAIL TIP
BOGIE WHEEL ASM.
RAIL BUMPER
INSIDE OF RAIL
A
B
C
D
D
E
METRIC FASTENERS
= T
A: 7.4 ft-lbs (10 Nm)
B: 4 ft-lbs (5.4 Nm)
C: Torque nut until screw protrudes 7/32" (5.3mm)
D: 17 ft-lbs (23 Nm)
E: 33 ft-lbs (45 Nm)
CAUTION
Some rail shaft fasteners are pre-coated with locking
agent. Never re-use these fasteners once removed.
Always use new pre-coated fasteners.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 600 RUSH 2010 and is the answer not in the manual?

Polaris 600 RUSH 2010 Specifications

General IconGeneral
Horsepower120 HP
Engine Displacement599 cc
Cylinders2
CoolingLiquid
Bore x Stroke77.25 mm x 64 mm
Fuel SystemCleanfire Injection
IgnitionDigital CDI
Front SuspensionPRO-RIDE
Rear SuspensionPRO-RIDE
Track Width15 in
Track Lug Height1.25 in
Front Travel9 in
Ski Stance42.5 in
BrakeHydraulic Disc
Width48 in
StarterElectric
Drive ClutchP-85
Track Length121 in
Rear Travel14 in
Ski TypeGripper
Driven ClutchTEAM

Related product manuals