4.44
Cleanfire Fuel Injection
Digital Wrench® Data Grid Screenshots
2010 RUSH 600 - Engine at Idle (75° F shop room temperature/1,060 ft. ASL)
The data grid can display numerous sensor/switch inputs and outputs. Not all are shown in the screenshots above. Use
the
(+) and (-) button to add and remove data parameters.
Always verify the reading against known information. Some
of the items to look for include:
• Is the barometric pressure, intake air temperature, and engine coolant temperature accurate?
• Is the TPS voltage (at idle) accurate?
• Does the TPS voltage transition smoothly when the throttle lever is pushed?
• Is the Injector/ignition voltage 15.5-16.5 VDC?
To Next Page
Loading...
Need help?
General
