5.32
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
CARGO BOX 6X6
Removal / Installation (6x6)
CAUTION
An assistant should be used for box removal.
CAUTION
Use caution when disconnecting the harness to keep
from damaging the connector. Do not pull on wires.
Damaging a connector may require wire harness
replacement.
1. Disconnect the two wire harnesses connected to
each of the tail lights.
2. Lift up firmly the cargo box release lever on either
side of the ATV and tilt the box.
3. Remove the pivot bolt nuts attaching the rear of the
cargo box to the frame on each side.
4. Support the cargo box using a suitable tool in order
to remove the clips and pins holding the gas shock to
the cargo box and frame.
BODY / STEERING / SUSPENSION
To Next Page
Loading...
Need help?
General
