Renesas RL78/G1D User Manual

RL78/G13 CHAPTER 29 ELECTRICAL SPECIFICATIONS
R01UH0146EJ0100 Rev.1.00 985
Sep 22, 2011
Caution The pins mounted depend on the product. Refer to 2.1.1 20-pin products to 2.1.14 128-pin products,
and 2.1.15 Pins for each product (pins other than port pins).
29.3.4 Recommended Oscillator Constants
(1) X1 oscillation: Ceramic resonator (AMPH = 0, TA = − 40 to +85°C)
Recommended Circuit Constants
Oscillation Voltage
Range
Manufacturer Part Number
SMD/
Lead
Frequency
(MHz)
Frash
operation
mode
Note
C1 (pF) C2 (pF) Rd (kΩ) MIN. (V) MAX. (V)
CSBFB1M00J58-R1 SMD 100 100 0
CSBLA1M00J58-B0 Lead
1.0
100 100 0
1.7 5.5
CSTCC2M00G56-R0 SMD 2.0 Internal (47) Internal (47) 0
CSTCR4M00G55-R0 SMD Internal (39) Internal (39) 0
CSTLS4M00G53-B0 Lead
4.0
HS, LV, LS
Internal (15) Internal (15) 0
1.6 5.5
CSTCR4M19G55-R0 SMD Internal (39) Internal (39) 0
CSTLS4M19G53-B0 Lead
4.194
Internal (15) Internal (15) 0
CSTCR4M91G53-R0 SMD Internal (15) Internal (15) 0
CSTLS4M91G53-B0 Lead
4.915
Internal (15) Internal (15) 0
CSTCR5M00G53-R0 SMD Internal (15) Internal (15) 0
CSTLS5M00G53-B0 Lead
5.0
Internal (15) Internal (15) 0
CSTCR6M00G53-R0 SMD Internal (15) Internal (15) 0
CSTLS6M00G53-B0 Lead
6.0
Internal (15) Internal (15) 0
CSTCE8M00G52-R0 SMD Internal (10) Internal (10) 0
CSTLS8M00G53-B0 Lead
8.0
HS, LS
Internal (15) Internal (15) 0
1.8 5.5
CSTCE8M38G52-R0 SMD Internal (10) Internal (10) 0
CSTLS8M38G53-B0 Lead
8.388
Internal (15) Internal (15) 0
CSTCE10M0G52-R0 SMD Internal (10) Internal (10) 0
Murata
Manufacturing
Co., Ltd.
CSTLS10M0G53-B0 Lead
10.0
HS
Internal (15) Internal (15) 0
2.4 5.5
CCR4.0MUC8 SMD 4.0 HS, LV, LS Internal (27) Internal (27) 0 1.6 5.5
CCR8.0MXC8 SMD 8.0 HS, LS Internal (18) Internal (18) 0 1.8 5.5
TDK
Corporation
CCR10.0MXC8 SMD 10.0 HS Internal (18) Internal (18) 0 2.4 5.5
Note Set the flash operation mode by using CMODE1 and CMODE0 bits of the option byte (000C2H/010C2H).
Caution The oscillator constants shown above are reference values based on evaluation in a specific
environment by the resonator manufacturer. If it is necessary to optimize the oscillator characteristics
in the actual application, apply to the resonator manufacturer for evaluation on the implementation
circuit. The oscillation voltage and oscillation frequency only indicate the oscillator characteristic. Use
the RL78/G13 so that the internal operation conditions are within the specifications of the DC and AC
characteristics.
Remark Values in parentheses in the C1, C2 columns indicate an internal capacitance.
<R>

Renesas RL78/G1D Specifications

General

Brand	Renesas
Model	RL78/G1D
Category	Computer Hardware
Language	English