RL78/G13 CHAPTER 25 FLASH MEMORY
R01UH0146EJ0100 Rev.1.00 930
Sep 22, 2011
25.1 Writing to Flash Memory by Using Flash Memory Programmer
The following dedicated flash memory programmer can be used to write data to the internal flash memory of the
RL78/G13.
• PG-FP5, FL-PR5
• E1 on-chip debugging emulator
Data can be written to the flash memory on-board or off-board, by using a dedicated flash memory programmer.
(1) On-board programming
The contents of the flash memory can be rewritten after the RL78/G13 has been mounted on the target system. The
connectors that connect the dedicated flash memory programmer must be mounted on the target system.
(2) Off-board programming
Data can be written to the flash memory with a dedicated program adapter (FA series) before the RL78/G13 is
mounted on the target system.
Remark FL-PR5 and FA series are products of Naito Densei Machida Mfg. Co., Ltd.
To Next Page
Loading...
Need help?
General
