Renesas RL78/G1D User Manual

RL78/G13 CHAPTER 10 WATCHDOG TIMER
R01UH0146EJ0100 Rev.1.00 469
Sep 22, 2011
10.2 Configuration of Watchdog Timer
The watchdog timer includes the following hardware.
Table 10-1. Configuration of Watchdog Timer
Item Configuration
Control register Watchdog timer enable register (WDTE)
How the counter operation is controlled, overflow time, window open period, and interval interrupt are set by the option
byte.
Table 10-2. Setting of Option Bytes and Watchdog Timer
Setting of Watchdog Timer Option Byte (000C0H)
Watchdog timer interval interrupt Bit 7 (WDTINT)
Window open period Bits 6 and 5 (WINDOW1, WINDOW0)
Controlling counter operation of watchdog timer Bit 4 (WDTON)
Overflow time of watchdog timer Bits 3 to 1 (WDCS2 to WDCS0)
Controlling counter operation of watchdog timer
(in HALT/STOP mode)
Bit 0 (WDSTBYON)
Remark For the option byte, see CHAPTER 24 OPTION BYTE.
Figure 10-1. Block Diagram of Watchdog Timer
fIL
WDTON of option
byte (000C0H)
WDTINT of option
byte (000C0H)
Interval time controller
(Count value overflow time × 3/4)
Interval time interrupt
WDCS2 to WDCS0 of
option byte (000C0H)
Clock
input
controller
17-bit
counter
Selector
Overflow signal
Reset
output
controller
Internal reset signal
Count clear
signal
Window size
decision signal
Window size check
Watchdog timer enable
register (WDTE)
Write detector to
WDTE except ACH
Internal bus
WINDOW1 and
WINDOW0 of option
byte (000C0H)
fIL/2
6
to fIL/2
16

Renesas RL78/G1D Specifications

General

Brand	Renesas
Model	RL78/G1D
Category	Computer Hardware
Language	English