To Next Page

To Previous Page

Troubleshooting

100

Load paper by repeating steps

and

Note

❒ The tray can hold up to 4,000

sheets.

Close the top cover of the large ca-

pacity tray (LCT).

Loading Paper in the

Interposer

Important

❒ Load paper on the side already

printed (the side you want as

front).

❒ Load paper in the interposer in the

same orientation as paper in the

paper tray.

❒ The staple or punching location

will be on the left side of the paper,

when you are facing the machine.

❒ Do not place anything on top of or

leave documents on the sensor.

This may lead to the paper size not

being correctly scanned or paper

jams.

❒ When using the Z-fold function,

the paper in the interposer must be

of the same size as the prints after

they have been Z-folded. If the pa-

per in the interposer is larger than

the Z-folded sheets, a misfeed

might occur.

Load the paper.

Adjust the paper guides to the pa-

per size.

MartiniC2_ENzen_F_pre_FM.book Page 100 Tuesday, July 27, 2004 1:24 PM

Ricoh 4051 User Manual

Other manuals for Ricoh 4051