Covers
95
4
Covers
Using this function, you can insert cover and back sheets fed from a different
tray to that of the main paper, and print on them.
Reference
For printing methods, see the printer driver Help.
Limitation
❒ To use this function, Collate must be set. Rotating Collate cannot be set.
Note
❒ The cover sheets should be the same size and orientation as the body of the
paper.
❒ If "Auto Tray Select" is set as the paper feed tray for the body paper, the paper
will be delivered from a tray containing paper in the K orientation. There-
fore, if the cover paper is set to L orientation, the orientation of cover and
body will be different.
❒ The cover sheets will not be printed when the sheet for the cover page is fed
from the optional interposer.
• For information about setting paper when using the optional interposer,
see “Loading Paper in the Interposer”, General Settings Guide.
❖
❖❖
❖ Cover Sheet
Prints the first page of the document on the sheet for the cover page.
• Print on one side
Prints on one side of the cover sheet only, even when duplex printing is se-
lected.
GCPY016E
4
4
MartiniC25-EN-Pref-F_FM_ZF.book Page 95 Tuesday, July 27, 2004 11:51 AM
To Next Page
Loading...
Need help?
General
