Ricoh 4051 User Manual

129
5. Special Operations under
Windows
Printing Files Directly from Windows
You can print files directly using
Windows commands. For example,
you can print PostScript files for Post-
Script 3.
❖
❖❖
❖ Windows 95/98/Me
You can print files directly using
ftp command.
❖
❖❖
❖ Windows 2000/XP, Windows Server
2003, Windows NT 4.0
You can print files directly using
lpr, rcp or ftp command.
Setup
Follow the procedure below to make
network environment settings.
A
AA
A
Enable TCP/IP with the control
panel, and then set up the print-
er’s network environment about
TCP/IP including IP addresses.
TCP/IP of the printer is set as de-
fault.
B
BB
B
Install a TCP/IP in Windows to
set up the network environment.
Consult the network administrator
for the local setting information.
C
CC
C
To print under Windows 2000/XP,
Windows Server 2003, or Win-
dows NT 4.0, install “Printing
service for UNIX” as the network
application. To print under Win-
dows NT 4.0, install “Microsoft
TCP/IP printing” as the network
application.
Reference
For details about setting the IP
address of the printer using
DHCP, see p.137 “Using DH-
CP”.
This completes the setup for
specifying a printer using an IP
address when printing. When
using a host name to specify a
printer, proceed to p.130 “Using
a Host Name Instead of an IP
Address” and continue the set-
up.

Ricoh 4051 Specifications

General

Brand	Ricoh
Model	4051
Category	All in One Printer
Language	English