Ricoh 4051 User Manual

Network Administrator Settings
99
8
Network Administrator Settings
The network administrator settings that can be specified are as follows:
System Settings
The following settings can be specified.
❖
❖❖
❖ Host Interface
• Network
You can specify all the settings except “Auto-Obtain (DHCP)”.
• IEEE 1394
*1
You can specify all the settings except “Auto-Obtain (DHCP)”.
• IEEE 802.11b
*2
All the settings can be specified.
*1
The IEEE1394 interface board option must be installed.
*2
The IEEE802.11b interface unit option must be installed.
❖
❖❖
❖ File Transfer
• SMTP Server
SMTP Server Name
Port No.
• E-mail Communication Port
• E-mail Reception Interval
• Scanner Recall Interval Time
• Number of Scanner Recalls
• Auto Specify Sender Name
❖
❖❖
❖ Administrator Tools
• Administrator Authentication Management
Network Management
• Program / Change Administrator
Network Administrator
You can specify the user name and change the full-control user’s authority.
• Extended Security
Driver Encryption Key
Permit Simple Encryption
Permit Settings by SNMP V1 and V2
MarC25_EN_SecRef_F_FM.book Page 99 Monday, August 2, 2004 6:14 PM

Ricoh 4051 Specifications

General

Brand	Ricoh
Model	4051
Category	All in One Printer
Language	English