To Next Page

To Previous Page

Enabling Authentication

Set "Admin. Authentication" to [On].

[Available Settings] appears.

Select the settings to manage from "Available Settings".

Note

❒ To specify administrator authentication for more than one category, repeat

steps

Press [

Press the {

{{

{User Tools/Counter}

}}

} key.

User Authentication

There are four types of user authentication method: user code authentication,

basic authentication, Windows authentication, and LDAP authentication. To use

user authentication, select an authentication method on the control panel, and

then make the required settings for the authentication. The settings depend on

the authentication method.

Important

❒ When using Windows authentication or LDAP authentication, keep in mind

that if you edit an authenticated user’s e-mail address or any of the other data

that is automatically stored after successful authentication, the edited data

may be overwritten when it is reacquired at the next authentication.

Note

❒ User code authentication is used for authenticating on the basis of the user

code, and basic authentication, Windows authentication, and LDAP authen-

tication are used for authenticating individual users.

❒ You cannot use more than one authentication method at the same time.

❒ User authentication can also be specified via Web Image Monitor. For details

see the Web Image Monitor Help.

MarC25_EN_SecRef_F_FM.book Page 53 Monday, August 2, 2004 6:14 PM

Ricoh 4051 User Manual

Other manuals for Ricoh 4051