19
1. Getting Started
Guide To Components
1.
Auto document feeder (ADF)
Load a stack of originals here. They will
be fed automatically one by one.
The front and back side of 2-sided origi-
nals are scanned simultaneously.
2.
Exposure glass
Place originals face down here.
3.
Copy tray (optional)
Copied or printed paper is delivered
here.
4.
Copy tray guide
When copying onto OHP transparencies
and translucent paper, raise the guide to
prevent copies from curling when deliv-
ered.
5.
Main power switch
If the machine does not operate after
turning on the operation switch, check if
the main power switch is turned on.
6.
Operation switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).
ZGVH310N
MartiniC2_ENzen_F_pre_FM.book Page 19 Tuesday, July 27, 2004 1:24 PM
To Next Page
Loading...
Need help?
General
