Ricoh 4051 User Manual

Settings You Can Change with User Tools
67
4
❖
❖❖
❖ Delete All Files
All documents stored in Document Server will be deleted.
Note
❒ Even if a password has been set, all documents will be deleted.
❒
A confirmation dialog box will appear. To delete all documents, select [Yes].
❖
❖❖
❖ Program/ Change LDAP Server
See Network Guide.
❖
❖❖
❖ Use LDAP Server
You can specify whether or not to use the LDAP server.
Note
❒ Default: Off
❒ When Use LDAP Server is set to Off, [Search LDAP] will not appear on the
searching display.
❖
❖❖
❖ AOF (Always On)
Specify whether or not to use Auto Off function.
Note
❒ Default: On
❒ For details about this function, contact your service representative.
❖
❖❖
❖ Firmware Version
You can check the version of the softwares installed in this machine.
❖
❖❖
❖ Auto Erase Memory Setting
When the optional DataOverwriteSecurity Unit is installed, you can specify if
data is to be automatically deleted after a job is completed.
Note
❒ Default: Off
❒ You can also specify the method of overwriting.
Reference
See the manual for DataOverwriteSecurity Unit.
❖
❖❖
❖ Erase All Memory
When the optional DataOverwriteSecurity Unit is installed, you can erase all
the data stored in the hard disk drive of the machine.
Reference
See the manual for DataOverwriteSecurity Unit.
MartiniC2_ENzen_F_pre_FM.book Page 67 Tuesday, July 27, 2004 1:24 PM

Ricoh 4051 Specifications

General

Brand	Ricoh
Model	4051
Category	All in One Printer
Language	English