Cleaning the Printer
86
7
Cleaning the Friction Pad and the Paper
Feed Roller
If the friction pad or paper feed roller is dirty, a multi-feed or misfeed might oc-
cur. In this case, clean the friction pad and paper feed roller as follows:
CAUTION:
Important
❒ Do not use chemical cleaner or organic solvent such as thinner or benzine.
A Turn off the power switch.
B Pull out the plug from the socket. Remove all the cables from the printer.
C Lift and pull Tray 1 carefully, and then pull it out with both hands.
Place the tray on a flat surface. When there is paper in the tray, remove paper.
• Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, you should take care that the power cord will
not be damaged under the machine.
• Do not pull out the paper tray forcefully. If you do, the tray might fall and
cause an injury.
• Do not put your hands inside the printer when the input tray is removed.
Some internal parts become hot and are a burn hazard.
ASH137S
To Next Page
Loading...
Need help?
General