Loading Paper
63
5
Loading Paper in the Bypass Tray
Important
❒ Set the size and direction of the loaded paper using the printer driver. Make
sure the settings do not conflict. Otherwise, the paper may jam or the print
quality may be affected.
❒ Load paper with the print side down and in the short-edge feed direction.
❒ Duplex printing is not possible.
❒ You cannot use the bypass tray to feed in paper that requires a specified print-
ing position (such as preprinted paper). Use Tray 1 for such paper.
❒ If paper is curled, straighten it before loading, by bending it the paper in the
opposite direction to the curl, for example.
❒ Do not load paper while the printer is printing.
❒ Tray 1 and 2 are unavailable while paper is being loaded in the Bypass Tray.
❒ You cannot load paper when the printer is in Energy Saver mode. To disable
Energy Saver mode, click the {Stop/Start} key on the control panel.
A Insert the top edge of the paper into the printer.
B Adjust the paper guides to the paper size.
ASH057S
ASH058S
To Next Page
Loading...
Need help?
General