Specifying the Printer
97
9
Using TCP/IP
Use this procedure to connect the computer to the printer via Ethernet.
The printer is automatically added, if the connection is successfully detected.
Mac OS X 10.4.x or earlier
A Connect the printer and the computer using the Ethernet cable.
B On the desktop, double-click the hard drive icon.
C Double-click [Applications], and then open the [Utilities] folder.
D Double-click [Printer Center] or [Printer Setup Utility].
The [Printer List] dialog box appears.
E Click [Add] in the [Printer List] dialog box.
If you are using Mac OS X 10.2.x or Mac OS X 10.3.x, press and hold the [alt/op-
tion] key, and then click [Add]. Proceed to step 9..
If you want to add a new printer, click [Add] as a confirmation window for
printer addition appears.
F If this printer is in the same segment as the Macintosh with which you are
configuring, the printer is detected automatically and displayed on the de-
fault browser list. If the printer is not displayed, proceed to step 8.
G From the [Printer Browser] list, select the printer with the corresponding IP
address under [Printer Name] and with [Connection] listed as [(Printer name) Net-
work]. Click [Add] after checking that the name of this printer appears in
[Name:]. Proceed to step 14.
H Press and hold the [alt/option] key, and then click [More Printers].
I From the protocol drop-down menu, select [Advanced].
J When the [Advanced] window appears, select [(Printer name) Network Printer]
from the [Device:] drop-down menu.
K Enter a name that you like in [Device Name:].
L Enter the IP address of the printer in [Device URI:] after "(Printer name)Network://".
M Select the manufacturer name from the [Printer Model:] drop-down menu.
From the list displayed, select the name of this printer, and then click [Add].
N Check that the name of this printer appears on the printer list in [Printer List].
If you are using Mac OS X 10.2.x or Mac OS X 10.3.x, select this printer from
the printer list, and then click [Add].
O Go to [Printer Setup Utility] in the menu bar, and then click [Quit Printer Setup Utility].
To Next Page
Loading...
Need help?
General