Preparing for Printing
16
1
If Bidirectional Communication Is Disabled
Set up option settings when bidirectional communication is disabled.
Important
❒ Manage Printers permission is required to change the printer properties in
the [Printers] folder. Log on as an Administrators or Power Users group mem-
ber.
A On the [Start] menu, point to [Settings], and then click [Printers].
When using Windows XP or Windows Server 2003/2003 R2, click [Printers and
Faxes] on the [Start] menu.
When using Windows Vista or Windows Server 2008, click [Control Panel] on
the [Start] menu, and then click [Printer].
B Click the icon of the printer you want to use.
C On the [File] menu, click [Properties].
D Click the [Accessories] tab.
If you are using the PostScript 3 printer driver, click the [Device Settings] tab.
E Select options installed from the [Options] area, and then make the neces-
sary settings.
F Select the total amount of the memory in [Total Memory:], when the optional
SDRAM module is added.
G Under [Paper Size Settings], click and highlight the tray to be used, select the
appropriate size , and then click [Update].
H Click [OK] to close the printer properties dialog box.
To Next Page
Loading...
Need help?
General