Installing the Printer and Options
20
2
Attaching Memory Unit Type F 256MB (DDR-SDRAM Module)
CAUTION:
Important
❒ Before touching the memory unit, ground yourself by touching something
metal to discharge any static electricity. Static electricity can damage the
memory unit.
❒ Do not subject the memory unit to physical shocks.
A Turn off the power, and then unplug the power cable.
B Remove the memory cover.
C Loosen the screw securing the inner cover by using a coin.
• Before installing the memory unit, turn off the printer's power switch and un-
plug the power cable. After installing the memory unit, be sure to close the
memory unit cover, and then turn the machine back on. Do not turn on the
machine before closing the memory unit cover.
ASH026S
ASH027S
To Next Page
Loading...
Need help?
General