Special Operations under Windows
92
8
Using a Host Name Instead of an IPv4 Address
When a host name is defined, you can specify a printer by host name instead of
IPv4 address. The host names vary depending on the network environment.
When using DNS
Use the host name set to the data file on the DNS server.
When setting the IPv4 address of a printer using DHCP
Use the printer name on the configuration page as the host name.
Reference
For details about printing a configuration page, see p.77 “Printing the printer
configurations”.
In other cases
Add the IPv4 address and host name of the network printer to the hosts file on
the computer used for printing.
A Open the hosts file using memo pad files, for instance.
The hosts file is in the following folder:
\WINNT\SYSTEM32\DRIVERS\ETC\HOSTS
B Add an IPv4 address and host name to the hosts file using the following
format:
192.168.15.16 host# NP
“192.168.15.16” is the IPv4 address, “host” is this printer's host name, and
“#NP” is replaced by comments. Insert a space or tab between “192.168.15.16”
and “host”, between “host” and “#NP” respectively, using one line for this
format.
C Save the file.
To Next Page
Loading...
Need help?
General