Ethernet Configuration
33
4
Making Network Settings for Using Netware
If you use NetWare, select the frame type for NetWare.
Select one of the items below if necessary.
•Auto Select
•Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
Important
❒ Usually, use the default setting ([Auto Select]). When you first select [Auto Se-
lect], the frame type detected by the printer is adopted. If your network can
use more than two frame types, the printer may fail to select the correct frame
type if [Auto Select] is selected. In this case, select the appropriate frame type.
A Press the {Menu} key.
B Press the {T} or {U} key to display [Host Interface], and then press the {#En-
ter} key.
C Press the {T} or {U} key to display [Network Setup], and then press the {#En-
ter} key.
ASI066S
Menu:
Host Interface
Host Interface:
Network Setup
To Next Page
Loading...
Need help?
General