Ricoh D074 Series Troubleshooting

134
5.2.4 Edges of letter fold bent
When letter folding is applied, the edge of the inner flap may become bent.
CEZ592
Solution:
The solution depends on whether letter folding is applied to multiple sheets or a
single sheet.
<When letter folding is applied to multiple sheets>
1.
Load the paper the other side up.
2.
Print the image. Is the problem resolved?
Yes
Finished!
No
Go to the next step.
3.
In the [Adjustment Settings for Skilled Operators] menu, set [0604: Letter
Fold-in Position 1 (Multi-sheet Fold)] to "0.0 mm".
4.
In [General Features] in [System Settings], set [Letter Fold-in Position] for
multiple sheets to "7 mm".
5.
Print the image. Is the problem resolved?
Yes
Finished!
No
Contact your service representative.

Ricoh D074 Series Specifications

General

Brand	Ricoh
Model	D074 Series
Category	Printer
Language	English