145
6. Improving Throughput
6.1 Reducing the Waiting Time Prior to Printing
After receiving a print job, the machine usually stops to let the fusing temperature
reach an appropriate level for printing.
The waiting time for the fusing unit to cool down may be quite long, especially
before printing on thin paper. By decreasing the fusing temperature during standby,
you can reduce the waiting time.
1. In the [Adjustment Settings for Skilled Operators] menu, decrease the
temperature by 10°C in [0206: Adjust Fusing Temperature on Standby].
Decrease the value in "Temperature on Standby Mode", "Temperature on
Panel Off Mode", and "Temperature Before Performing a Process" by 10°C.
Note:
• When printing on paper other than thin paper, we recommend leaving the above
settings unchanged.
To Next Page
Loading...
Need help?
General
