26
3.1.11 Ghosting
A ghost image of an image to be printed appears at a distance of 189 mm (7.5
inches) to the side of the intended image.
189mm(7.5in.)
R
R
R
R
R
R
CNT007
Cause:
The image transfer current is transmitted to the drum, where a potential difference
occurs between a developed area and non-developed area and causes the
intended image to be reproduced.
This may occur if:
• Solid filled images or bold characters are printed in black on a halftone
background
• Printing is done at low temperature or humidity
• Many screening lines are used
Solution:
1.
In the [Adjustment Settings for Skilled Operators] menu, select [0201: Adjust
Image Density].
2.
Print the image. Is the problem resolved?
Yes
Finished!
No
Contact your service representative.
To Next Page
Loading...
Need help?
General
