76
4.2.2 If (J080) Appears
Cause:
The correct paper feed speed is not being maintained.
When using slippery paper, traction may be lost, reducing paper feed speed.
Solution:
1.
In [Advanced Settings] for the custom paper in use, set [07: Regist Jam
Detection with Feed Dir] to [Off].
When you set this to [Off], the printed image may become misaligned at the
leading edge.
2.
Print the image. Is the problem resolved?
Yes
Finished!
No
Contact your service representative.
To Next Page
Loading...
Need help?
General
