47
3.4.3 Fainter Leading Edge
The leading edge is fainter.
CEZ562
Cause:
At low temperature or when using thin coated paper, this may occur if the paper
transfer current is insufficient.
At high temperature, this may occur if the paper transfer current is excessive.
Important:
This solution only works when the thickness of the paper is equivalent to Paper
Weight 4 or higher. Do not try this as a solution when using paper with a thickness
equivalent to Paper Weight 3 or lower, as it may cause paper misfeeding.
Note:
• To adjust the following settings, pre-register the type of paper in use as a custom
paper. For details about registering custom papers, see "Registering a Custom
Paper", Paper Settings Reference.
To Next Page
Loading...
Need help?
General
