Ricoh Interactive Whiteboard Controller Type 2 User Manual

• Depending on the version of the whiteboard, the custom stamp may not be displayed properly
when you are using the remote whiteboard function to share the screen.
Exporting a Custom Stamp
1. Use your computer to access the Web page for the machine.
For details about how to access the Web page, see page 122 "Displaying the Top Page".
2. Click [Administrator Settings].
3. Enter the administrator password in the password entry field.
4. Click [OK].
5. Click [Added Data Management].
6. Click [Download] of "Custom Stamp".
7. Specify the location to which you want to save custom stamps, and then click [Save].
The compressed file uploaded to the machine is downloaded.
Deleting a Custom Stamp
1. Use your computer to access the Web page for the machine.
For details about how to access the Web page, see page 122 "Displaying the Top Page".
2. Click [Administrator Settings].
3. Enter the administrator password in the password entry field.
4. Click [OK].
5. Click [Added Data Management].
6. Click [Delete] of "Custom Stamp".
7. Click [Delete] in the message that appears.
8. Click [Close] in the message that appears.
The custom stamp is deleted. These settings are reflected after the whiteboard is restarted.
8. Changing the Interactive Whiteboard Settings
198

Ricoh Interactive Whiteboard Controller Type 2 Specifications

General

Brand	Ricoh
Model	Interactive Whiteboard Controller Type 2
Category	Controller
Language	English