• This folding error will not occur if uncurled paper is used or sheets that curl downward.
Folded Sheets Are Not Stacked Properly
Cause:
If a large number of half-folded multi-sheet is delivered, the edge of the sheets may bulge and some part
of the edge will be swollen. If this happens, other sheets loaded on the bulged paper may turn over in
the output tray.
This is likely to occur if:
• Thick, relatively stiff paper is used.
As a bundle is delivered, its folded edge may droop and catch on the stacked bundles, causing the
delivered bundle to flip over.
Solution:
Use the Z-fold support tray for multi-folding unit.
This will reduce the angle of stacked bundles and prevent bundles flipping over as they are delivered.
Multi-Folding Unit
165
To Next Page
Loading...
Need help?
General
