Image Scaling Error on the Side 2 of Paper
Paper feed direction
Original
Output
Side 1 Side 2
CEZ525
Cause:
An image scaling error on the side 2 of the paper may occur because the paper expands or contracts
after the image on the side 1 of the paper has been fused.
Solution:
Adjust the scaling for the side 2 of the paper and minimize the difference in print size between the side 1
and the side 2.
1. Select [Machine: Image Position] in [Advanced Settings] for the custom paper in use and
adjust the following for 1101: [Image Position].
• To adjust the horizontal scaling
[With Feed] of [Image Magnification: Side 2]
• To adjust the vertical scaling
[Across Feed] of [Image Magnification: Side 2]
Press [ ] to increase the scaling and [ ] to decrease it.
2. Print the image. Is the problem resolved?
Yes Finished!
No Contact your service representative.
Paper Feed Problems Affecting Image Quality
95
To Next Page
Loading...
Need help?
General
