Ricoh Pro 8310 User Manual

SC Code List
This table contains a list of selected SC codes. If the SC code that is displayed on the control panel is
listed in this table, carry out the recommended procedure. If the SC Code is not listed in this table,
contact your service representative.
• If the error persists after replacing the unit, contact your service representative.
Code Error Procedure
332-01 Toner supply motor 1 error (left bottle) Check that toner supply motor 1 operates
properly.
332-05 Toner supply motor 2 error (right bottle) Check that toner supply motor 2 operates
properly.
336-01 Developer imperfect setting (K) Check the developer.
410-01 Remaining potential: Vr detection error (K) Replace the photoconductor unit.
411-01 Charge potential: Vd adjustment error (K) Replace the charge unit.
412-01 Exposure potential: Vpl adjustment error (K) Replace the charge unit.
2. Troubleshooting Service Call Problems (SC Codes)
16

Ricoh Pro 8310 Specifications

General

Print Resolution	2400 x 4800 dpi
Paper Capacity	Standard: 3, 300 sheets Maximum: 12, 600 sheets
Operating System Compatibility	Windows, Mac OS, Linux
Maximum Paper Size	13" x 19.2"
First Print Speed	4.5 seconds
Weight	518 lbs
Connectivity	Ethernet 10/100/1000Base-TX
Power Source	220-240V, 50/60Hz
Duplex Printing	Standard
Network Connectivity	Ethernet 10 base-T/100 base-TX/1000 base-T