3. Print the image on twenty sheets. Do glossy lines appear on the tenth sheet and later
sheets?
Yes Repeat Step 2 and 3. If the problem persists even though the setting has reached its
minimum value, contact your service representative. If the problem is resolved, go to the
next step.
No Go to the next step.
4. Check the toner fusion. Is it satisfactory?
Yes Finished!
No Restore the previous setting and contact your service representative.
Insufficient Gloss
The image is not glossy enough.
Solution:
If the gloss of the image is not glossy enough, carry out the procedures in Procedure 1, "Changing the
fusing temperature" and Procedure 2, "Changing the process speed" of page 65 "Insufficient Toner
Fusing".
3. Troubleshooting Image Quality Problems
64
To Next Page
Loading...
Need help?
General
